Cleaning and Maintenance DIY Projects

How to Get Rid of Black Mold in The Shower

We may receive commissions from certain links you click on our website. As an Amazon Associate I earn from qualifying purchases.

Please don't forget to share my content!

Black mold is not only a matter of aesthetics, but also health. If you suspect that the mold is highly toxic, you should contact a professional. This is quite rare, but it may happen in case of long-term water damage in your bathroom. Our bathrooms are the perfect environment for mold growth since they are damp, dark, and there’s plenty of moisture. Check out the following tips to get rid of black mold in your shower!

1. Removing Mold from Shower Caulking

If you noticed any mold growing in your shower caulking, the best solution is to remove it and apply mold-resistant caulk. This is an easy task, so you do not need to call a professional. It does not take long to apply it, but you must wait until it is completely dry before using the shower.


A less efficient method is to mix distilled white vinegar with baking soda in a small bowl. Use sufficient quantities to get a paste, and then apply it on the moldy caulk using a paint brush. Cover the paste on the mold with a plastic foil, tape it in place, and leave it for a minimum of two hours. Then, remove the foil and clean the paste and repeat the process until you no longer see any mold on the shower caulking.

2. Removing Mold from Shower Grout

The next step is to remove the mold from shower grout. You should use an electric scrubbing brush if you want to save time; if not, a regular scrub brush can also remove the mold, but it will take much longer.

Put white, undiluted vinegar on the moldy grout and leave it for up to 10 minutes. Using the scrubber, remove at least 70% of the mold. After this, make a paste by combining water and soda baking and continue scrubbing the grout. Keep brushing with the electric brush until you can no longer see any mold. Rinse the area with water.


3. Removing Mold from Shower Drain

This is perhaps the quickest and easiest tasks when it comes to black mold in the shower. If the drain has a cover, remove it and spray the entire area with peroxide. Leave it for a few minutes and use a small brush, such as an old toothbrush, to clean all the mold. Rinse with water when you cannot see any more mold.

4. Tips to Prevent Mold Growth in the Shower

Mold growth is quite common, so here is what you can do to stop or prevent mold growth:

  • Wipe everything dry after each use
  • Thoroughly clean your bathroom regularly
  • Spray vinegar in the bathroom after each bath or shower
  • Use an exhaust fan or other device to reduce humidity levels

Summary

All in all, you can easily get rid of black mold in the shower, especially if you have an electric scrubber. You can use all-natural ingredients, such as vinegar and baking soda, to clean all parts with the added benefit that they are not toxic.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.