Techniseal was the first to launch polymeric sand in the early 2000s. Hardscape specialists use this material to fill paver joints, the spaces left between each paver, tile, or natural stone. Today, many homebuilders consider it the ultimate paver jointing material. Thousands of hardscape specialists all over the world use polymeric sand every day. It blocks insect infestation and weed growth and also offers optimal joint stabilization.
Polymeric sand works wonders, but it hasn’t gained much of a reputation among the general public. How does it work? The fine sand contains silica, which locks the sand particles together when activated. As the sand particles fuse, the joint between two pavers becomes impenetrable. Then it locks them into place. Check out our premium selection of polymeric sands that give you the best value for money.
Best Polymeric Sand for Concrete Paver Joints
1. Dominator Polymeric Sand with Revolutionary Ceramic Flex Technology
The Dominator Polymeric Sand comes with its proprietary Ceramic Flex technology which has exceptional durability and flexibility. The polymeric sand is made with sand and contains no cement. One great thing about this polymeric sand is that you can rinse it easily and that can provide exceptional results and easy installation.
Each container of Dominator Polymeric Sand comes with a quick start guide which allows the users to easily start filling in joints as large as 4 inches. All you need to do is apply this polymeric sand on dry surfaces that have proper drainage conditions, the rest will be taken care of by the product. Dominator Polymeric Sand comes in a plastic container that can also be reused after applying the sand. It also makes installation and transportation a lot easier.
2. Gator Polymeric Super Sand Bond
Thanks to its Advanced Haze Free Technology, the Alliance Gator Polymeric Sand can be used for joints that are up to 2.5 cm or 1 inch. One great feature of this polymeric sand is its fine gradation, this means the polymeric sand can be used in finer and very tight joints as well.
The alliance gator polymeric sand helps in the prevention of erosion and lowers the impact of snow and rain. If you don’t like weeds growing between the pavers, deploying the gator between them will completely eliminate that problem. Overall, the Alliance Gator Polymeric Sand is easy to use and yields great results without a lot of effort.
Best Polymeric Sand for Tight Joints
3. Gator Maxx G2 Intelligent Polymeric Sand
The Gator Maxx G2 Polymeric Sand has an optimized mixture of calibrated sand and polymer binders. It is available in 2 different shades; beige and slate gray, so you can match the finish with the pavers or surfaces. The polymer really locks down the pavers and becomes firm in a short amount of time.
This polymeric sand provides exceptional and long-lasting durability, all the while retaining the flexibility that is needed between the pavers. It can easily be used on patios, foot pads, parking spaces, driveways, pavements, and even pool decks. It takes only around 15 minutes to solidify and will last you a good while if applied correctly.
Best Polymeric Sand for Pavers and Stone Joints
4. Rhino Power Bond Plus Polymeric Sand
If you’re looking for polymeric sand that can be used for joints up to 4 inches in size, the Rhino Power Bond Plus is a great choice. It can set in under 15 minutes after water activation and can become rain safe in only 24 hours. Unlike other sands that are used between pavers, Rhino Power Bond Plus Polymeric Super Sand resists erosion caused by wind and rain.
Rhino Power Bond Plus Polymeric Sand comes in a waterproof plastic bag and is available in 50 pounds packages. The polymeric sand is also flexible, after application you can check the flex yourself by pushing the pavers a bit which makes it a lot more durable than rigid sand.
Best Polymeric Sand for Cobblestone and Natural Stone
5. Empire Blended Lock-em-Up Polymeric Jointing Sand
The Lock-Em-Up Paver Sand made by Mutual Industries secures pavers in their place and really does a great job of locking them up. It is made out of silica sand and a potent polymer bonding agent. It is remarkable in the prevention of erosion between the pavers. As this is paver Sand, it is recommended that you use it on spaces that are one and ½ inches wide, anything more and it won’t work as great as you would like.
The Mutual Industries Lock-Em-Up Paver Sand looks great after solidifying and works just as advertised. A 50 pounds bag would easily be able to cover around 300 square feet which is more than enough for most household customers. It looks like sand even after becoming cured, which can be a great thing for those who are looking for the sand aesthetic without the worry of it eroding away after rain.
6. Buddingco Polymeric Sand Joint Stabilizing for Pavers
In the market for some good quality polymeric sand that will not blow away just because the wind decided to be harsh? Then the Buddingco Polymeric Sand just might be what you’re looking for. This polymeric sand can be used on false joint pavers and other surfaces without any worries of erosion by water or wind. Apply it on patios, driveways, parking spaces, footpads, and even pavements that see a lot of traffic.
It is recommended that you apply it above freezing temperatures, so it can easily set in optimal conditions. Once it is set properly, it becomes somewhat solid and locks the pavers together. There is also some flexibility even after setting which allows the polymeric sand to be more durable and long-lasting.